CERTIFIED RIGGER LEVEL 1 TRAINING:
Competent person training provides the necessary training to designate the employee to work as a competent basic rigger. And covers the following topics:
- OSHA regulations
- ASME regulations
- Chain slings proper inspection and use
- Wire rope slings proper inspection and use
- Round slings proper inspection and use
- Web slings proper inspection and use
- Mesh slings proper inspection and use
- Sling protection
- Shackles, eyebolts, hooks, mechanical couplers, swivel hoist rings, Plate clamps,
- Rigging hardware
- Allowable ware
- Sling inspections
- Sling hitches
- Verifying the load weight
- Rating charts
- Sling angles
- Center of gravity
- Fall zone
- Tag lines
- Power line safety
- Safe working practices around cranes
8 HOUR CLASS WITH TESTING (AVAILABLE IN SPANISH)
CERTIFIED RIGGING LEVEL 2 TRAINING:
Designed for the Journeyman rigger teaches rigging principles and methods. You will learn calculating methods job planning hitches lift plans load turning and pre-use inspections. And covers the following topics:
- OSHA Regulations
- ASME Regulations
- Lift planning
- D/d ratios
- Below the hook lifter applications
- Rigging hardware and rating charts
- Load angle factors and how to calculate the tension
- How to use the rigging book for information
- Calculating the center of gravity
- Assembly and disassembly
- Softeners and sling protection
- Sling hitches
- Power line safety
- Tagline safety
- Fall zone
2 – 8 HOUR DAY CLASS WITH TESTING
CERTIFIED HAND SIGNAL TRAINING:
Provides the training necessary to signal a crane and to be a designated spotter FOR A CRANE operator if a power line is with in the reach of the crane. And covers the following topics:
- OSHA Regulations
- ASME Regulations
- Hand, Voice and Audible signals
- Crane dynamics involved in lifting and swinging a load
- Crane charts and limitations
- Signal person responsibilities
- When a signal person is required
- Clearances from power lines
- Side loading
- Two Blocking
- Tipping
- Leveling the crane
- Fall zone
- Crane failures
- Crane Hazards
5 HOURS CLASS WITH WRITTEN AND ORAL TESTING (AVAILABLE IN SPANISH)
LOAD TESTING:
Of your lifting beam fixture or device including small jib cranes.
CONSULTING SERVICES:
Onsite compliance inspections and recommendations done on hourly rate.